The Swegon GLOBAL RX  TOP  air handling unit range is a complete new series of efficient and robust units, developed for installers valuing simplicity, contractors that need to keep time and budget and end-users who want the right indoor climate at the right cost.

The GLOBAL range suits small to medium size projects such as retail shops, restaurants, offices, schools, hotels, residential buildings, fitness centers, day-care centers, gyms, theaters and public buildings.

  • Integrated TAC5 controls
  • Equipped with standard or high efficiency heat exchanger
  • Temperature efficiency, heat recovery up to 85%
  • Air flows up to 3200 m³/h or 890l/s
  • Cooling energy recovery
  • Equipped with composite or aluminium fans

Size overview 

  0 . 1000 . 2000 . 3000

Right-hand version :


 Left-hand version :





Exhaust air  Supply air  
Outdoor air   Extract air  

Brilliant Simplicity – in every step

  • Selection: Every unit has a straight forward article number; one for right-hand units and one for left-hand units. Other parts, like post-heating coils, dampers or outdoor mounting kits are easily selected as accessory for each unit.
  • Offer and Order: You can quickly get an offer for any of the RX GLOBAL air handling units from your local sales representative who will also assist you in taking care of your order.
  • Delivery: Units and accessories are delivered ex-works within 10-15 working days.
  • Start-up and commissioning: One piece units, no mechanical assembly besides accessories and duct work is required on site. Start-up and commissioning is done quickly, due to the build-in TAC5 control on board all the GLOBAL units that includes different running modes and time clocks
  • Usage and Service: Once commissioned the GLOBAL air-handling units do not require much attention. Since all fans are direct driven there are no pulleys and belts and standard maintenance procedures such as change of filters are indicated by a service alarm.

Highly efficient heat exchangers

The highly efficient, Eurovent certified rotating heat exchangers. They facilitate supply temperatures and permit or allow transfer of humidity between the two airflows. The exchangers are in “salt-air resistant” aluminium and are suitable for temperatures up to 80°C. They are compliant with the DIN1946 tightness standard and are Eurovent approved according to the EN 308 standard.


  • Rotary heat exchanger (RX)

The rotary heat exchanger consists of a rotating wheel with a multitude of small air ducts made of aluminium. The warmer extract air heats the ducts and the heat is transferred to the colder supply air. Temperature efficiency is as high as 80 %. A certain amount of moisture, removed with the extract air, is recovered to the supply air. This can be beneficial in the winter when the outdoor air is usually dry and results in problems for people and interior fittings and electronics.

The Rotary heat exchangers for the Global RX TOP is distinctly different ranges. One range optimised for thermal efficiency and lowest pressure drop.

Installers choice for 40 years

Focussing on installation cost for projects with small to medium air volumes, short delivery times, off-the-shelf products with easy to use controls for start-up, commissioning.

  • Hardware:

The unit has a casing of prepainted galvanised steel sheet in RAL 7016. The units are insulated with 50mm Rockwool and can be delivered as left or right units. Operating temperatures are from -20°C to +50°C

  • Software:

The unit is equipped with the smart control system TAC5 with optional connectivity by Modbus RTU, TCP IP over Ethernet, TCP IP over Wifi, Bacnet, KNX. The standard unit is equipped with TACtouch touchscreen.

  • Accessories

  external casing
TAC5 Controller   External casing   Electrical heating
Motorized damper
Flexible connection   Cooling coil


885315 / 885142


RX 05 TOP | RX 08 TOP | RX 10 TOP | RX 12 TOP | RX 13 TOP | RX 14 TOP | RX 16 TOP


  = Included

  = Available as accessory

Global RX 08 TOP

Air Volume 100- 1500m³/h 
Inspection side R/L
Counterflow heat exchanger -
Rotary heat exchanger
Pre filter G4
Filter Class (supply  / extract) F7/M5(F7)
Filter kit replacement article number 510117
Filter type  Bag
Filter size in mm (Supply air) 640 x 385 x 380
Filter size in mm (Extract air) 335 x 457 x 360
Free cooling ;
External pre- / post heating  or cooling (Water/DX)
Internal max post heater  
Post heating capacity 21°C 2,07kW
External dampers
Power connection 230 V, 50 Hz, 10A
maximum current without accessories 5A
Motorization Variable speed drive
Heat exchanger STANDARD efficiency D.B. (EN 308) 78%
Heat exchanger HIGH efficiency D.B. (EN 308) 82%
Casing radiated sound power level    (LWA) in dB(A) 51,5
SFP (kW/m³/s) at reference air volume* <2
Weight without accessories  310kg
Duct connection (mm) Ø250
Unit size (L x W x H) 1530 x 815 x 1315

* Reference air flow is 70% of maximum air flow with 100Pa external pressure drop



Find PDFs

1 Hits   Page < 1 >



Article Name Type Size Date Add to bucket
Page < 1 >
GLOBAL LP FW  Technical cataloge Catalogue/Product sheets 2.87MB 4/2/2019 Add to bucket